Slide Top with Clamps: Upgrade Your Blanket Loom Setup

Your blanket loom should help you enjoy the making, not leave you juggling your project and reaching from one end to the other. The Slide Top for Loom with Clamps from Uppercase Designs adds smooth side-to-side movement to your setup, so you can bring the section you’re working on closer to you.

Attach your loom, secure the Slide Top to a compatible table or counter, and let your setup do more of the supporting. Both hands are free to focus on your stitches.

What does a Slide Top do for a blanket loom?

The Slide Top lets your attached loom move from side to side while you knit. Instead of holding the loom and stretching across your project, you can slide it into a more convenient working position.

It’s a practical upgrade for blanket makers who want a supported, table-mounted setup without adding a separate stand right away.

Turn your table into a blanket-making station

The included clamps attach the Slide Top directly to a compatible table or counter. Pivoting legs are not required for this setup, and looms are sold separately.

The Slide Top measures 45 inches (114.3 cm). Its clamps fit surfaces ½–2 inches (1.3–5.1 cm) thick and up to 1⅞ inches (4.8 cm) deep. Your table or counter needs a minimum width of 39 inches (99.1 cm).

Check those measurements against your chosen surface before ordering. A good fit is the starting point for a setup you’ll enjoy using.

An upgrade for the loom you already love

The Slide Top with Clamps is compatible with all Uppercase Designs looms. That means you can build on your existing setup rather than replace it just to add sliding movement.

Start with your loom, add the Slide Top + Clamps Kit, and give your blanket-making station room to grow. The expandable Uppercase Designs ecosystem lets you upgrade your process as your ambitions grow, rather than settling for a standalone loom with nowhere to go next.

What’s included?

The product includes the Slide Top, clamps, four slider pads for two looms, assembly instructions, and access to an online assembly video. Looms and pivoting legs are sold separately.

Is the Slide Top a loom stand?

Not on its own. This configuration clamps to a compatible table or counter, giving you side-to-side sliding motion without requiring separate legs. It’s a way to upgrade your working position using a surface you already have.

Make your next blanket with a setup that moves with you

You put care into every blanket. Your equipment deserves the same thought. If you’re ready to stop holding your loom and start enjoying a supported, sliding setup, explore the Slide Top for Loom with Clamps and choose your options directly on the product page.

Slide Baby Slide.

Uppercase Designs
The Original Creator of the Chunky Blanket Loom™

Questions? info@UppercaseDesigns.ca | Toll-free: 1-888-860-7735.