Optional Upgrades
For the Pivot + Slide System & Convertible Loom Table
Enhance your setup with optional height upgrades, extended base options, and accessories designed to give you even more flexibility.
Slide Top Clamps
NEW! Turn almost any table, countertop, desk, or dining room table into a knitting workstation. The NEW Slide Top Clamps securely attach your Slide Top to a compatible work surface, eliminating the need for Pivoting Legs and creating a compact, portable setup that's perfect for smaller spaces, travel, workshops, and everyday use.
The clamps can also be used directly with compatible Uppercase Designs Looms, giving you even more flexibility as your setup evolves.
Fits surfaces from 1/2" to 2" thick and up to 1.875" deep. Your table or counter needs to be at least 39" wide. (Need bigger, no problem, reach out after you place your order.)
Use Your Own Loom
Want just the clamps? You can connect directly to the bottom of your loom and enjoy the benefit of holding your loom in place. (no side to side motion in this version) Order the Loom Clamps with Adapter Set.
If your Loom has extension pieces, they need to be securely supported. If not, add the Loom Support Board to your order.
Hint: Don't want to purchase the Loom Support Board? You can purchase a thin board in the length you need from a local wood supply store and use it with the clamps to support your Loom.
Quick Fit Loom Extender
NEW! Quickly add extra width to your Loom when you need it. The Quick Fit Loom Extender is a new non-wood accessory designed to attach easily to compatible Uppercase Designs Looms — giving you extra Loom width without adding a traditional wood Loom extension. Great for temporarily increasing your Loom size for larger blankets or projects.
Compatible with all Uppercase Designs Looms, including our Pro Series Looms. Not compatible with the Ultra Skinny Loom Series or Skinny Blanket Loom. If you have more then one of our looms, let us know which loom you want the Extender for.
Sidekick
Mount a Sidekick on your Pivoting Leg and keep scissors and a lighter within easy reach.
***NEW - The Shop Apron That Became The Everyday Apron!
You never knew you needed one until you started wearing it! Made from heavy-duty 100% cotton fabric with premium embroidered detailing, it protects your clothes from everyday spills and that annoying pilling and wear on the front of your favorite shirts.
Keep your scissors, lighter, and essentials (did we mention your cell phone?) right where you need them.
And don't be surprised if you're still wearing it at the end of the day! I've been caught wearing it into Michaels Craft Store.
Make It Personal! Add your embroidered name. Simply email us your chosen name after placing your order. (Personalization will add additional shipping time to your order.)
Loom Support Board
"...because sometimes we just need a little extra support!"
An optional add-on that helps maintain rigidity and alignment when using the Pivot + Slide System.
If your Loom is not from Uppercase Designs, the Loom Support Board is usually required for proper performance.
Most customers working with longer Looms (over 65") or heavier blankets also choose to add this for extra stability.
Designed for Looms no wider than 3" from front to back. Uppercase Designs Looms are designed to work without it.
Non-Uppercase Designs looms work! For hinged, sectional, longer, or less rigid looms, we recommend the Loom Support Board Kit.
The kit includes a 45" Loom Support Board, additional loom pads, and upgraded 3" sliders instead of the standard 2" sliders.
Your loom can extend beyond both ends of the board, provided all joints are supported on the board.
Height Upgrades
Adjustable Low Rise (1 Pair)
Raises your Loom to a comfortable seated counter height. Adjustable from 4-1/2" to 7".
12"-16" Adjustable High Rise (No Base)
Raises your Loom for use with a walking pad, while standing, or even over a bed. A Loom long enough to span the width of your bed is required. The sliding feature does not work when used over a bed. A longer base is recommended for added stability — see Foot Extension.
Base Options
Foot Extension (For Existing Base)
Extends your current foot base length to almost 36". Ideal for higher setups or heavier yarn.
35" Base – With Pivoting Bracket (1 Pair)
Includes pivoting bracket. Compatible with the Pivot + Slide System.
Extra Pads
Additional Pads (8 Pads – enough for 4 Loom sections)
Use these pads on additional Loom sections.
Pre-Numbered Peg Tips
Pre-numbered caps/tips make it easy to keep track of your rows, repeats, or pattern sections as you work. Designed to friction fit onto your Loom pegs, they can be removed and used over and over or glued in place permanently.
Reach out if you need custom caps or to provide your peg size. Available for peg diameters of 1/2" or larger. Quantity: 66 tips.
Slide Table Top (No Legs)
Requires Pivoting Legs to function. This product does not include legs.
For customers who already own Pivoting Legs and want to upgrade to the full Pivot + Slide System without purchasing a complete setup.
✔ Designed for use with your existing Pivoting Legs
✔ Converts your setup into the full Pivot + Slide System
Pro Series Pivoting Legs (Seated)
For Pro Series 3-Pack Looms
Adds seated comfort and adjustability to your Loom setup, allowing you to pivot the height and angle to suit your workspace.
✔ Designed for seated use (sofa, chair or stool)
✔ Pivoting design for adjustable height and angle
✔ Compatible with Pro Series 3-Pack Loom configurations
✔ Can be used with the Slide Table Top to create a full Pivot + Slide setup
Includes two pivoting leg pieces. Loom and tabletop sold separately.
SHIPPING
We Ship Internationally!
We ship to many countries around the world. If you can add it to your cart and complete checkout, we can ship to you!
All Duties & Taxes Paid!
Applicable duties and taxes are included in your checkout total, so there are no additional customs charges upon delivery.
