Can I Upgrade My Blanket Loom Setup? Pivot & Slide vs. Slide Top + Clamps

Yes, your Uppercase Designs blanket loom can be the starting point, not the whole story. When you’re ready to upgrade your setup, the question isn’t simply what to buy next. It’s where you want to sit and how you want to move your loom while you make your blankets.

All Uppercase Designs looms are compatible with the Pivot & Slide System and the Slide Top + Clamps Kit. These give you two ways to build on your loom: a freestanding setup or a sliding setup attached to a suitable table or counter.

Want a setup without a table? Choose Pivot & Slide.

The Pivot & Slide System supports your loom on its own legs. You can set up in front of your sofa or dining chair without needing a tabletop to hold your loom.

The system lets you pivot your loom and slide it side to side as you work. Instead of holding the loom yourself or continually shifting your position to reach across it, you can reposition the loom and keep both hands free to make your blanket.

When it’s time for a break, your loom and blanket can stay in place. It’s a setup you can return to, rather than a project you have to hold throughout every session.

Already have a table you love? Choose Slide Top + Clamps.

The Slide Top + Clamps Kit attaches the Slide Top to a compatible table or counter. It adds side-to-side sliding movement without requiring the Pivoting Legs.

This is a useful starting point if you already have a suitable surface and want to bring your blanket-making setup to it. Your loom is supported while you slide it across to reach different parts of your project.

Before ordering, check your surface against the product’s clamp requirements. The standard clamps fit surfaces ½–2 inches (1.3–5.1 cm) thick and up to 1⅞ inches (4.8 cm) deep, with a minimum table or counter width of 39 inches (99.1 cm). Check the edge as well as the thickness, not just whether the table looks wide enough.

Do I have to choose my final setup now?

No. Start with the arrangement that suits the space you have today.

Pivoting Legs can be added later to the Slide Top setup. If you already own the Pivoting Legs, you can purchase the Slide Top separately rather than buying the whole system again. Optional clamps also let you use a Slide Top on a suitable table or counter instead of its legs.

That’s the benefit of an upgradeable ecosystem: your first purchase can remain part of what you build next.

What if I have a longer loom?

The standard setup is optimized for looms around 65 inches (165.1 cm), but this is not a maximum loom-length restriction. Longer slide tops are available, and makers are using longer looms on their setups.

Choose the slide-top length and configuration for your loom and the space where you want to use it. Movement can vary with the length and weight of the setup, so optimization does not mean every configuration will move identically.

Does an upgrade include a loom?

Don’t assume the loom is included with every system option. The Pivot & Slide System’s loom is sold separately unless you select an option that includes one. The Slide Top + Clamps Kit also lists looms and Pivoting Legs separately.

If you already own an Uppercase Designs loom, choose your upgrade around what you have. If you’re building your first setup, review the selected options so you order the pieces you need without duplicating them.

Which upgrade should I choose first?

Choose the Pivot & Slide System if you want a freestanding setup with pivoting and sliding movement, without relying on a table. Choose the Slide Top + Clamps Kit if you want side-to-side movement at a suitable table or counter you already use.

You don’t need to buy everything at once. Start with what will improve your next blanket-making session, knowing there is room to build on it.

Explore the Pivot & Slide System.

Explore the Slide Top + Clamps Kit.

Slide Baby Slide.

The Original Creator of the Chunky Blanket Loom™

Questions? info@UppercaseDesigns.ca | Toll-free: 1-888-860-7735.