Pivot + Slide System for Loom
Elevate Your Process - Elevate Your Status!
***PROMOTION - Add a Blanket Loom and Save on your loom purchase and shipping - plus get the over 100 Tutorial bundle with your loom purchase!***
All Chunky Blanket Loom™ products work with the Pivot + Slide System. When you add a loom to your Pivot + Slide order on this page, you’ll pay one shipping fee, receive a discount on your loom, and get the Over 100 Lifetime Tutorial Bundle included with your loom purchase.
Whether this is your first loom or your fifteenth, the Pivot + Slide System makes blanket making more comfortable from day one. Focus on knitting, not adjusting your setup. No more clearing tables. No more awkward reaching. The loom moves with you. The Pivot + Slide System is a patent-pending design that brings comfort, flexibility, and professional results wherever you choose to create. (Loom Not Included unless selected.)
Also, this is not the Convertible Loom Table, go here to see that product, it does not slide but you can add the slider top to it.
This isn’t just an upgrade — it changes how you knit. Because makers don’t just create blankets — they create reputations. The Elite Standard in Blanket Making.
Key Features
✅ Pivot + Side-to-Side Slide Motion – Smoothly pivot and slide your loom for full comfort and control.
✅ All Chunky Blanket Loom™ products work with the Pivot + Slide System.
✅ Compatible with most looms that meet the simple Compatible Loom Design guidelines below. Some may benefit from the optional Loom Support for added stability.
✅ Supports Longer Looms – Looms over 65" can still be used; however the sliding feature is optimized for looms up to 65". You may need to leave the legs vertical rather than pivoted and you may have a bit of reach on either end if your loom is very long.
✅ One System, Multiple Looms – If you own more than one loom, you can switch between them on the same Pivot + Slide System (one at a time).
✅ Optional Sit or Stand Setup – Create in comfort wherever you want — on the sofa, at a table, or standing tall with loom lifters. Choose low-rise or high-rise loom lifters to customize your height. They are easy to remove and lower back down to sitting position.
✅ Optional Loom Support – For added stability when using extension pieces, an optional Loom Support base is available. While most looms will work on their own, the Loom Support provides additional rigidity when needed.
The Loom Support base is 45-1/2" long. If your extension pieces are longer, they may extend past the ends by 50% of the length of your extension on either end.
Using the Loom Support will raise the overall height of the Pivot + Slide System by approximately one inch. If a lower height is preferred, we can shorten the legs upon request.
✅ Easy Assembly – Quick to set up so you can start looming faster.
✅ Patent Pending – Exclusive innovation from the Original Creator of the Chunky Blanket Loom™.
Why You’ll Love It
Designed for beginners and experienced makers alike.
If you’re just starting out, this system helps you build good habits from the beginning — proper posture, smooth movement, and a comfortable setup while you learn.
The Pivot + Slide System for Looms takes chunky blanket making to a professional level. No more wondering “Where can I make this blanket and where can I put it when I'm still working on it.” With the Pivot + Slide Loom System, the answer is: anywhere you want — sitting or standing.
“No more clearing tables. No more awkward reaching. The loom moves with you.”
Important Details
No loom instructions, tutorials, or patterns are included. Can be purchased with your Pivot and Slide order and receive a discount off the Tutorial Bundle or order a loom on this page and receive the lifetime tutorial bundle.
The height of the sitting table is 25". When you add your loom to the top, it will be about 28" depending on the height of your loom.
CHECK YOUR LOOM – Compatible Loom Design Guidelines
To ensure smooth sliding performance, your loom simply needs to meet the Compatible Loom Design guidelines below.
A compatible loom design refers to a loom that:
• Has a smooth, flat bottom surface even if you need to remove any feet
• Remains structurally stable during use
• Maintains its shape during normal knitting tension.
With regards to hinged looms, the only hinged loom that has been tested is the Hinged Loom by ShilohOnlineBoutique and it is compatible with the Pivot and Slide System. There is a possibility you may still need the Loom Support Board, feel free to reach out if you have any questions. Ideally, the hinge should be located near the middle/center of the loom.
🔧 ***New*** Loom Support Board – Expands Compatibility
Some multi-piece or extension-style looms may benefit from additional base support to maintain alignment during knitting.
The optional Loom Support Board is designed to increase rigidity and stability, helping more loom styles perform smoothly on the Pivot + Slide System.
If your loom includes extension pieces or multiple connection points, the Loom Support Board can improve alignment and expand compatibility.
About the Loom Support Board
"...because sometimes we just need a little extra support!"
If you select this option, to make setup simple, we pre-install the required Velcro on the Loom Support Board before shipping.
• The Support Board arrives with the necessary Velcro already attached
• 8 additional Velcro pads are included for your extension pieces
• Allow 2 pads per loom section — enough for 4 loom boards
This ensures proper alignment and stability right out of the box.
Optional: If you have more than four loom pieces, you may need to add additional pads. While all sections may not fit on the board at the same time, you can configure different loom lengths as needed.
If you’re unsure about your loom, we’re happy to confirm compatibility before you order. info@UppercaseDesigns.ca
Frequently Asked Questions – Pivot + Slide Loom Table
How to select the width of your loom in the drop-down when ordering
Example:
If your loom is 46" long × 2" wide × 1" high, select 2".
If your loom is 46" long × 2-1/2" wide × 3/4" high, select 2-1/2".
We use the width measurement to ensure proper fit.
What if my loom isn’t very rigid at the joints?
If your loom has multiple sections or extension pieces and you’d like additional stability, we recommend selecting the optional Loom Support Board. It helps maintain alignment and improves overall rigidity while knitting.
Does the Pivot + Slide System come with a loom?
No. You must supply your own loom.
What size looms can I use with this table?
The table is compatible with looms up to 65" long. Longer looms can still be used, but the sliding feature is optimized for looms up to 65".
Does it work with the Original Chunky Blanket Loom™?
Yes. It was designed to integrate seamlessly with all Chunky Blanket Loom™ products.
Does it work with all Looms?
It may work with other looms that meet the Compatible Loom Design guidelines listed above. See Compatibility section for details.
Can I use it sitting down or standing up?
Yes. Optional low-rise and high-rise loom lifters make it easy to use in several positions.
What are the pads?
The pads are adhesive-backed Velcro pads used with the slider mechanisms. You may use multiple looms with the system (one at a time), with each loom requiring two pads. Once applied, the pads remain on the loom, allowing looms to be easily interchanged as needed.
I already have the Pivoting Legs, do I need to purchase the whole system?
No, you will need to purchase just the top Check it out here
Is it hard to set up?
No. We assemble as much as we can that still allows us to pack and ship. Generally, there are 2 screws at the top of the each leg and 2 screws that go into each foot with an included Allen key. We tape these screws in the holes where you need them so that it makes for a quick and easy assembly. A tutorial video for how to assemble is included.
Does this system include tutorials or patterns?
No. You’ll need to use your own loom tutorials or you can purchase the tutorials from us that include over 100 Online video tutorials and pattern stitches, accessible anytime of the day - Lifetime! Or you can purchase a loom from us and receive the Tutorials free with the purchase of our loom. Check out all of the looms available by the original creator www.UppercseDesigns.ca
When will my order ship?
Orders ship out usually 1-10 days and are fulfilled in the order they are received. Demand has been high, so we recommend ordering early.
Still not sure if your loom will fit?
Reach out — we’ll confirm for you before you order info@UppercaseDesigns.ca or call 1-888-860-7735
If you’re ready to knit in comfort — even if this is your very first blanket — this is where you start.
